Description
Versatile. Flexible. Reliable. The Toro® 570Z sprinklers embody everything that makes private customers and irrigation professionals want to use just one series of sprinklers.
Features & advantages
Contact seal without flushing
Prevents rinsing when rising, enables the simultaneous use of several sprinklers.
One-piece non-return valve
Easy installation in the factory or on site. Holds water column up to 3 m (10′).
Low pressure or improved retraction spring
Select the spring that best meets the requirements of the location. New to the series is the 570ZLP low-pressure sprayer, which enables rising and lowering at lower pressures.
Ratchet climber
Easy and reliable adjustment of the sector on pop-up sprinklers.
Small cap diameter (50 mm/2″)
Unobtrusive, prevents damage due to exposure or vandalism.
No flushing during ascent
With a pressure-activated contact seal that is only flushed during immersion, leakage during ascent is avoided; this reduces water consumption and allows more heads per valve. This no-flush seal makes the 570Z series spray head interesting for anyone who takes effective water management seriously.
Technical data
Dimensions
- Housing diameter: 35 mm (13⁄8″) on models 2P, 3P, 4P, 6P and 6P SI, 40 mm (15⁄8″) on 12P, 45 mm (1¾”) on 12P SI
- Cap diameter: 50 mm (2″)
- Inlet: Female thread (13 mm, 1⁄2″)
- Side inlet: 120 mm (4¾”) from the top of the sprinkler to the center of the side inlet
Technical specifications
- Throw range: 0.6 to 5.5 m (2′-18′)
- Working pressure range (570Z): 1.4 to 5.2 bar (20 to 75 psi)
- Working pressure range (570ZLP): 1.0 to 5.2 bar (15 to 75 psi)
- Recommended pressure for spray nozzles: 2.1 bar (30 psi)
- Recommended pressure for rotary nozzles: 2.8 to 3.5 bar (40 to 50 psi)
- Flow rate: 0.2 to 17.0 l/min (0.05 to 4.5 GPM)
Additional functions
- Sturdy stainless steel return spring
- Low-pressure seal on LP models at 1.0 bar (15 psi) for low-pressure pumps and well systems
- All housings are supplied with a flush cap
Available options
- Check valve (570CV): Holds water column up to 3 m (10′) (does not apply to side inlet models)
- 570SEAL: Serviceable seal for all 570Z models
- Service water indicators: Service water hose adapter (102-0563), service water push-on cap (89-9752), service water molded cap with seal (102-1211)
- 570-6X: Extension of 150 mm (6″)
- 570-SR-6: Stationary riser 150 mm (6″), external thread inlet 13 mm (0.5″)
- 570-SR-18: Stationary riser 450 mm (18″), external thread inlet 13 mm (0.5″)
- Step-up pull-up tool (89-6395)
- Adjustment wrench (89-7350)
Model list
570Z-2P: Sprinkler 50 mm (= riser height or non-sprinkler housing height)
570Z-3P: Sprinkler 75 mm (= riser height or non-sprinkler housing height)
570Z-4P: Sprinkler 100 mm (= riser height or non-sprinkler housing height)
570Z-6P: Sprinkler 150 mm (= riser height or non-sprinkler housing height)
570Z-6PSI: Sprinkler 150 mm (= riser height or non-sprinkler housing height), housing with side inlet
570Z-12P: Sprinkler 300 mm (= riser height or non-sprinkler housing height)
570Z-12PSI: Sprinkler 300 mm (= riser height or non-sprinkler housing height), housing with side inlet
570S: Shrub adapter
